Home/Field guides/Evaporation fog: moisture added to cold air
Fog & visibility / FIELD GUIDE

Evaporation fog: moisture added to cold air

Relatively warm water can supply vapour to much colder air, allowing a shallow visible mist to form during mixing.

Cloud at ground level
Illustration of a related weather process.

What to notice

Wisps rise over a lake or river on a cold morning.

What is happening?

Water evaporating from a relatively warm surface adds vapour to the air immediately above it. When that warm moist air mixes with colder surrounding air, the mixture can become saturated and droplets form. This is the familiar steam-fog or evaporation-fog setting. The visible wisps are condensed droplets, not the invisible vapour leaving the water.

The surface need not be boiling. A lake that feels cold to a person can still be warm relative to very cold air above it. The temperature and moisture contrast matters. The visible layer can be shallow and turbulent, with individual wisps constantly appearing and fading as mixing changes the local saturation state.

Basis: NOAA / National Weather Service [1] · NOAA / National Weather Service [2] · NOAA / National Weather Service [3]

Read the observation

  • Compare water temperature with air temperature rather than judging either in isolation.
  • Watch the wisps form and disappear instead of following one as a permanent object.
  • Distinguish this setting from warm moist air cooling over colder water.
A USEFUL DISTINCTION

The visible white material above warm water is liquid droplets; water vapour itself remains invisible.

Go a little deeper

The last distinction separates two superficially similar views. Advection fog commonly involves warm moist air over a colder surface; evaporation fog over water commonly involves colder air receiving moisture from warmer water. Both contain droplets near the surface, so appearance alone can be ambiguous. Temperature observations and air-flow context help identify which exchange is plausible.

Evaporation from falling rain can also moisten a cooler layer enough to contribute to fog. This connects a cloud process aloft to reduced surface visibility without requiring nocturnal cooling. In the moisture lab, increasing starting relative humidity at fixed temperature represents a higher initial vapour pressure, while “Cooling applied” follows a separate cooling path from that state. The lab does not simulate evaporation or the mixing of two parcels. Real mixing changes heat and moisture together, which is why these separate controls do not form a complete steam-fog model.

Basis: NOAA / National Weather Service [1] · NOAA / National Weather Service [2] · NOAA / National Weather Service [3]

FOLLOW THE EVIDENCE

Sources & provenance

  1. National Weather Service Glossary: fog NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced.
  2. How Fog Forms NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced.
  3. The Hydrologic Cycle NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.

Explanations and diagrams are original educational interpretations. Source institutions have not endorsed or reviewed this publication. How we distinguish evidence from models.