The physical idea
Start with a temperature and a relative humidity, then apply cooling. The blue bars represent vapor pressure; their outlines represent saturation vapor pressure at each temperature. Before saturation, cooling changes the outline without changing the vapor pressure. This makes the ratio increase. The dew point is the temperature at which that ratio reaches one. Air is not a sponge that expands its storage capacity: saturation is an equilibrium between evaporation and condensation.
The calculation uses a Magnus-type liquid-water expression, es(T)=6.112 exp[17.67T/(T+243.5)] hPa. Initial vapor pressure is RH×es/100. Inverting the same expression supplies the dew point, so the temperature, humidity and dew point cannot contradict one another within this approximation. After the chosen cooling reaches saturation, the lab removes excess vapor as condensate instead of displaying humidity above 100%.
Try keeping the starting humidity at 60% and changing the temperature. The same relative humidity can correspond to quite different vapor pressures and dew points. Then reset and vary only cooling. Notice that dew point belongs to the original vapor-pressure state; cooling alone does not increase the pre-condensation dew point. This experiment follows a hypothetical parcel at fixed pressure and is not a real station record.
Basis: NOAA / National Weather Service [1] · World Meteorological Organization [2]
What the model assumes
- Temperatures are Celsius; vapor pressures are hPa, equivalent to millibars.
- Initial temperature −10 to 40 °C, initial RH 10–100%, cooling 0–20 °C.
- Liquid-water saturation expression; fixed pressure; no added moisture.
- Condensed vapor is removed once saturation is reached.
Where the explanation stops
- Water-relative humidity below freezing is not ice-relative humidity.
- Droplet activation, supersaturation, evaporation, mixing and precipitation are not represented.
- The diagram shows vapor pressure, not the mass of water in a changing parcel volume.
Sources & provenance
- Relative Humidity and Dewpoint Temperature from Temperature and Wet Bulb Temperature NOAA / National Weather Service · Publication date not statedReference only; original explanations, calculations and diagrams. No source media reproduced.
- Guide to Meteorological Instruments and Methods of Observation: Measurement of Humidity World Meteorological Organization · 2008 guide, hosted by NWSReference only; original explanations, calculations and diagrams. No source media reproduced.
Explanations and diagrams are original educational interpretations. Source institutions have not endorsed or reviewed this publication. How we distinguish evidence from models.