Home/Field guides/What the rain radar actually measures
Observations & maps / FIELD GUIDE

What the rain radar actually measures

Reflectivity describes returned radar energy. Rainfall intensity is inferred from it using assumptions about the particles being sampled.

Radar return
Illustration of a related weather process.

What to notice

A coloured echo appears overhead on a map, but the ground report is lighter rain or no rain.

What is happening?

Weather radar transmits electromagnetic pulses and measures returned energy from targets. Reflectivity summarises that return after accounting for radar geometry and processing. In common products it is expressed in dBZ, a logarithmic scale. Higher reflectivity often accompanies larger or more numerous precipitation particles, but particle size, phase and shape affect the signal strongly.

Radar does not directly weigh the rain entering a gauge. Converting reflectivity to rainfall rate requires a relationship based on assumptions about the drop population. Hail, melting snow, unusual drop distributions and non-weather targets can complicate that relationship. A bright band can occur near the melting layer, and strong returns do not always mean proportionately heavy rain at the surface.

Basis: NOAA / National Weather Service [1] · NOAA / National Weather Service [2] · NOAA / National Weather Service [3]

Read the observation

  • Read the legend’s variable and units before interpreting colours.
  • Check beam height and range from the radar.
  • Compare several frames with gauges or surface reports.
A USEFUL DISTINCTION

Radar colours are not universal, and reflectivity is not a direct measurement of accumulated rainfall at the ground.

Go a little deeper

The beam samples higher above ground as distance increases because of its elevation angle and Earth’s curvature. Terrain can block it, and shallow precipitation may lie below it. Meanwhile precipitation detected aloft can evaporate before arrival. Base reflectivity and a composite maximum through several elevations are different products; the latter may highlight strong echoes far above the surface.

In the remote-sensing lab, change the prescribed reflectivity, radar range and elevation angle separately. The calculation converts dBZ to a linear reflectivity factor and estimates beam-centre height; an opaque-cloud temperature proxy provides a separate infrared quantity. It does not generate a two-dimensional particle field or a map of rain. For a documented event, preserve radar site, product, scan time and legend. Avoid interpolating missing scans into claimed observations, and do not interpret a decorative animated sweep as the actual moment each pixel was sampled.

Basis: NOAA / National Weather Service [1] · NOAA / National Weather Service [2] · NOAA / National Weather Service [3]

FOLLOW THE EVIDENCE

Sources & provenance

  1. How radar works NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.
  2. Radar Images: Reflectivity NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.
  3. Precipitation NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.

Explanations and diagrams are original educational interpretations. Source institutions have not endorsed or reviewed this publication. How we distinguish evidence from models.