Home/Field guides/What the lines on a pressure map mean
Pressure & circulation / FIELD GUIDE

What the lines on a pressure map mean

Isobars connect equal pressure at a common time and reference level. Their spacing gives a first clue to the horizontal pressure gradient.

LIsobars: lines of equal pressure
Illustration of a related weather process.

What to notice

Closely packed lines around a low indicate a stronger pressure change over a short distance.

What is happening?

An isobar connects locations with the same pressure. On a typical surface analysis this is mean sea-level pressure, not the raw pressure measured at every ground station. Labels are often in hectopascals. A closed set of contours surrounding successively lower values identifies a low; successively higher values identifies a high. The words refer to the surrounding field, not to a universal dividing value.

Contour spacing matters only when the interval and map scale are known. A 4 hPa change across 100 km is a steeper gradient than the same change across 400 km. However, wind is also affected by rotation, friction, curvature and terrain. Closely packed isobars suggest stronger forcing but do not by themselves provide the gust speed at an exposed headland or a sheltered street.

Basis: NOAA / National Weather Service [1] · NOAA / National Weather Service [2] · NOAA / National Weather Service [3]

Read the observation

  • Find the map’s valid time and distinguish analysis from forecast.
  • Check the contour interval before comparing two maps.
  • Measure spacing perpendicular to the lines rather than along them.
A USEFUL DISTINCTION

An isobar is a line of equal pressure, not a wind track, rain boundary or forecast path of a storm.

Go a little deeper

Contours are an interpretation of observations and a modelled or analysed field. They do not represent physical walls. Small features can be smoothed out, and observations can be sparse over oceans or mountains. A front may cross the isobars because fronts describe changes in air-mass properties while isobars describe pressure. The two layers answer different questions on the same chart.

Try reading a map without looking first at the weather symbols. Locate the broad low and high centres, identify the strongest gradients, and then add the front and station observations. If reported winds disagree with a simple circulation picture, examine terrain, surface friction and time mismatch before deciding the map is wrong. This sequence gives the symbols a physical setting instead of treating them as independent icons.

Basis: NOAA / National Weather Service [1] · NOAA / National Weather Service [2] · NOAA / National Weather Service [3]

FOLLOW THE EVIDENCE

Sources & provenance

  1. How to read Surface Weather Maps NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.
  2. Origin of Wind NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.
  3. Air Pressure NOAA / National Weather Service · Publication date not statedReference only; original paraphrase; no source media reproduced. JetStream permits broad use of its materials; separate credits are not assumed cleared.

Explanations and diagrams are original educational interpretations. Source institutions have not endorsed or reviewed this publication. How we distinguish evidence from models.